22
a
b
Figure 25. Warning for HEPA replacement
IMPORTANT:
when you use the H201-FILTER-BOX, the working range of the Air Flow becomes 35-70
m
3
/h, if you set the Air Flow set point at a value more than 70 m
3
/h the message shown in Figure
26 will appear
Figure 26. Air Flow Warning message when using Air Filters
8.2.1.4
Status
Press on the
Status
icon
to open the Status page (see Figure 27 a). The Status Temperature page will
open (see Figure 27 b). On this page you can see the status of the Temperature Control Unit, with a summary of all
parameters allowing you to check that all is working properly. You may have to refer to this window when asking
for Okolab technical support.
a
b
Figure 27. Status page (a
–
b)
