Okolab Bold Line H101-CRYO-BL, Руководство пользователя

Страница: 15 / 37

15
The RED indicator means that there could be a problem with the unit. If after 20-30 minutes
the Red light does not turn to Green, turn the system off, wait 5 minutes and turn it back on.
If the problem persists contact Okolab at http://www.oko-lab.com
6.1.2 Changing Set Points
To change a set point, simply touch the corresponding tab. A new page will open where you can press +/ –
to adjust the temperature to the desired value from 3°C above ambient to 60°C. Press “Set” to save the
new set point or “Cancel” to undo.
Figure 7. How to change the Temperature set point
6.2.1 Temperature
Temperature Settings are adjusted by following the two steps below (look at the touching finger)
Figure 8. Temperature settings
6.2.1.1 Control Mode
The Temperature Control can run in two different modes, please choose which one you want to use, Sample
or Chamber Feedback Mode.
Figure 9 shows how to select Chamber Feedback Mode .
1
2