OKM eXp 4500, Руководство пользователя

Страница: 72 / 94

72 Operating Modes
to this point. So the area can be measured from distance. Switch on the Laser Pointer, to focus
on every single measure point. This scanning method is especially interesting in areas with
difficult access. So it is possible to inspect rock faces, hillside situations or similiar structures.
After proceeding the measurement the graphic can be stored, transferred onto a computer and analyzed
in the software. All functions of the software are usable but please note that a depth measurement is not
possible in this operating mode. The differences in temperature is only measured on the surface of the
ground and does not allow any indications about depth. Warm areas are represented in red color and
cold areas are shown in blue colors. If you are searching for cavities and are using the above explained
measurement principles you have to inspect especially the blue color parts inside your graphic.
7.6.1 Control Elements of FS-Thermoscan
7.6.1.1 Side View
Grip: The grip is used to hold the device during the measurement.
Analog Display:
On the analog display all measured values are visible.
Laser Pointer:
The laser pointer marks the position of the recording of the measured value, if activated.
Connection Plug: With the connection plug you can connect the device to the eXp 4500.
OKM GmbH
www.okmmetaldetectors.com
Illustration 7.34: FS-Thermoscan
Analog Display
Grip
Laser Pointer
Temperature Sensor
Connection Plug