OKM eXp 4500, Руководство пользователя

Страница: 64 / 94

64 Operating Modes
The operating mode “Mineral Scan” should only be used with the Super Sensor. Using other antennas
may result in not being able to see the finer or smaller mineral deposits.
7.5.1 New Mineral Scan
After activating this operating mode you have the possibility to
adjust the impulse mode setting. In figure 7.22 you can see the
corresponding sub-menu.
Please refer to section 7.1.1 (“New Ground Scan”) on page 52 for
further explanations concerning the impulse mode setting.
Then go to your start position and select the option “Start
Scanning” (Green Tick) to start the measurement. A message will
appear and ask if you are ready to start your measurement.
Rotate the multi-function control knob and select “Yes”. As soon
as you depress the knob, it is important to begin walking
immediately for the eXp 4500 is now recording data.
7.5.2 Browse Mineral Scans
The option
"Browse Mineral Scans"
is working accordingly to section 7.1.2 ("Browse Ground Scans") on
page 54.
7.5.3 Delete All Mineral Scans
The option "Delete All Mineral Scans" is working accordingly to
section 7.1.3 ("Delete All Ground Scans") on page 55.
7.5.4 Scan Technique
The following technique applies only to the Mineral Scan mode
with the Super Sensor
(1) Ensure that all batteries and power packs have enough of a
charge to complete the scan entirely.
(2) Per the area to be prospected, ensure that you can travel the
desired path without any interruptions, pauses or large obstacles
(see explanation below).
The scan needs to be conducted in the following manner. Create a path where a single line can be
traversed. This path needs to be a longer path, usually greater than 20 meters in length. The normal
length for areas of prospection may be between 50 and 100 meters; up to 200m long. Areas of very
rough terrain will certainly be shorter.
This measurement needs to be a single line only!
OKM GmbH
www.okmmetaldetectors.com
Illustration 7.22: Automatic or Manual
selection screen
Illustration 7.21: Mineral Scan