SHD4-755AI_SSD4-742AI Rev07/2007
1. FAR / NEAR
2. WIDE / TELE
3. DC LEVEL
The VR for adjusting the IRIS level of Auto Iris Lens
4. SWITCHES
(1). AES/OFF
AES: Automatic Electronic Shutter. The range of shutter speed
from 1/60sec. (1/50sec.) to 1/100,000 sec.. This mode is
employed for using a manual iris lens.
OFF: AES OFF. The shutter speed is 1/60sec.
(1/50sec.).
When an auto iris lens is applied, AES should
be off.
(2). BLC/OFF
BLC: Backlight Compensation. When the object is dark by strong
light (sunlight etc….) as (Fig.2-1), please turn on BLC.
OFF : BLC OFF.
(3). AGC/OFF
AGC: Automatic Gain Control. The level of gain
Varies from 0 to 26dB.
OFF : AGC OFF. The level of gain is fixed at 0dB.
(4). FL/NOM
FL: Flickerless. In FL mode, the shutter speed is 1/100sec. (NTSC
system) / 1/120sec. (PAL ).
If choose FL mode, [AES] switch should be off.
NOM: Normal position.
Drill 20mm(3/4") hole on the ceiling as installation template. (see Fig.1).
Fix the mounting plate onto the ceiling as installation template shown holes
position. (see Fig.2).
Fix the dome camera body onto the mounting plate. (see Fig.3).
The
on bottom of dome camera body should be put in
the same way on mounting plate then turn right to make sure it is fixed
properly.
Adjust PAN/TILT position and FAR/NEAR &
WIDE/TELE bar to get the mounting picture. (see Fig.4).
Put the cover on to finish the installation. (see Fig.5).
One (1) SHD4-755AI-B, SHD4-755AI-W, SSD4-742AI-B or
SSD4-742AI-W Camera with video/power cable
One (1) Ceiling Top Plate
Five (5) Screws
One (1) Operational Manual
NOMENCLATURES AND FUNCTIONS
①
②
③
④
CAMERA MOUNTING
PACKAGE CONTENTS
