manualshive.com logo in svg

OKIDATA OKIPAGE 8c, Руководство по обслуживанию

Поделиться
Скачать
OKIDATA OKIPAGE 8c Скачать руководство пользователя страница 158

Page: 76

Service Guide - OKIPAGE 8c

Chapter 4 Adjustments

4.1.2 System maintenance mode

To enter the system maintenance mode, press and hold the RECOVER key while powering on the 
printer.

Note: The system maintenance mode is hidden and not available to the user.

To exit this mode, press the ONLINE switch except during rolling ASCII continuous printing. Then the 
RUN mode is set.

In the system maintenance mode, the category changes each time the MENU switch is pressed. The last 
category wraps around to the first category. The system maintenance mode supports the following 
functions:

Page count display

z

Rolling ASCII continuous printing

z

HSP ERROR recovery 

z

HSP ERROR count reset

z

Page count printing enable/disable

z

EEPROM reset

z

HSP ERROR count display

z

 (1) Page count display

The total number of pages counted at the engine is displayed on the operator panel.

z

(2) Page count printing enable/disable

This function selects whether to include (enable) or exclude (disable) the total number of printed 

z

pages counted at the engine at the time of menu printing.

(3) Rolling ASCII continuous printing

The rolling ASCII pattern is printed continuously for various engine tests.

z

Press the ON-LINE key to cancel this mode.

z

(4) EEPROM reset

All EEPROM areas (including Menu level-2) to the factory default values.

z

The following items are excluded

z

Head drive time setting

ENGINE Maintenance Item

Revision (Including Destination setting)

(5) HSP ERROR recovery

Содержание OKIPAGE 8c































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды