OKIDATA OKIPAGE 8c, Руководство по обслуживанию

Страница: 154 / 286

Page: 75
Service Guide - OKIPAGE 8c
Chapter 4 Adjustments
4.1.1 User maintenance mode
To enter the user maintenance mode, press and hold the MENU key while powering on the printer.
Functions z
Menu reset z
Drum counter reset z
(YELLOW, MAGENTA, CYAN, BLACK) z
Belt count reset z
Resource save area z
Operator panel menu disable z
SETTING z
Hex dump z
FUSER COUNT RESET z
Oil roller count reset z
Receive buffer size z
X adjust z
Darkness z
(YELLOW, MAGENTA, CYAN, BLACK)
Color Reg Adjust Execute
z
(a) Menu reset
Resets all Menu Level 1 settings to the default settings (which have been 1.
factory-set).
Resets all executable Emulation menu items (including options) to factory-set
2.
default emulation items.
(b)
Hex dump
Receives data from the host computer and dumps it in a hexadecimal format. 1.
When one or more page of data come from the host, printing automatically starts. 2.
To print out data of less than one page, press the ONLINE key to set the offline
state and press the EJECT key. Printing starts.
To exit this mode, shut off power to the page printer. This is the only way to exit this
3.
mode.
(c) Drum counter reset (for yellow, magenta, cyan and black)
Used to reset the drum life after the image drum is replaced. 1.
After drum-counter resetting is made, the page printer does not enter the operation 2.
mode automatically.
(d) Fuser count reset
Resets the fuser life counter the fuser unit is replaced.
(e) Belt count reset
Resets the belt life counter the belt unit is replaced.
(f) Oil roller count reset
Resets the oil roller life counter after the oil roller unit is replaced.
(g) Resource save area
Sets the resource saving area. This menu item appears when the option PS SIMM and
RAM increases. The selectable size will also increase. When adding RAM over
24Mbytes, the selection can be made up to 22.5Mbytes. The size upon auto will also
increase if the size of the add-on RAM increases.
(h) Receive buffer
Sets the receive buffer. The data transmission time from the upper command will
decrease when set to a high value, but memory overflow is more likely to occur. Memory
will be restructured with this change, and the contents of all download fonts, PCL macro,
and PostScript will be lost.