OKIDATA OKIPAGE 20, Руководство по обслуживанию

Страница: 73 / 284

Page: 39
Service Manual - OKIPAGE20
Chapter 3 Parts Replacement
(1) Remove the stacker assy. [See 3.3.6]
(2) Remove the feeder unit-front. [See 3.3.10] (At this point, the manual feed assy has not to be
removed.)
(3) Remove the DC fan motor. [See 3.3.3]
(4) Remove the contact assy. [See 3.3.2]
(5) Remove the plate-FG (F) (1).
(6) Remove the TR gear (2) and roller transfer (3).
(7) Unscrew 7 screws (4) and remove the main frame (5).
(8) Unlock latches at two points of the lever back up release (6) and pull out it in right direction.
(9) Unhook the EP lock spring (7) and remove the EP lock lever (8).
(10) Take off the E ring (9) and remove the plate-FG (1st ) (10) and gear assy-clutch (A).
(11) Unlock 2 latches to remove the motor assy-main (12) and idle gear (13).
(12) Unscrew 2 screws (14) and remove the motor -main (15).