OKIDATA OKIPAGE 20, Руководство по обслуживанию

Страница: 203 / 284

Page: 114
Service Manual - OKIPAGE20
Chapter C Duplex Unit
The listing of the statuses and problems displayed in the form of messages on the LCD is provided in
Table 4-1.
Classification LCD Status Message Description Recover Method
Jam Error Informs that a jam occurs
in retracting papers into
the reverse roller within
the duplex Unit. Remove all the papers
from the inside of printer
unit and Duplex unit and
close the cover.
Jam Error Informs that a jam occurs
in retracting papers into
the reverse roller within
the Duplex Unit. Remove all the paper
from the inside of printer
unit and Duplex unit and
close the cover.
Jam Error Informs that a jam occurs
in reversing papers in the
reverse roller within the
Duplex Unit. Remove all the papers
from the inside of printer
unit and Duplex unit and
close the cover.
Jam Error Informs that a jam occurs
in impinge-feeding
papers within the Duplex
Unit. Remove all the papers
from the inside of printer
unit and Duplex unit and
close the cover.
Jam Error Informs that the 1st tray
is pulled out in
paper-remaining state
when feeding papers
within the Duplex. Remove all papers from
the inside of printer unit
and Duplex unit and
close the cover.
Interface Timeout Informs that an I/F
time-out occurs between
the printer and Duplex. - Verify connection of
LEX-PCB and
square-shaped
connector. Replace the
square-shaped connector
if necessary.
- Replace LEX-PCB.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)