manualshive.com logo in svg

OKIDATA OKIPAGE 20, Руководство по обслуживанию

Поделиться
Скачать
OKIDATA OKIPAGE 20 Скачать руководство пользователя страница 261

Page: 162

Service Manual - OKIPAGE20

Chapter E Multi-Feeder

 
(1) Turn the printer power off and remove the Multi Feeder.

(2) Disengage the link and hopper cover.

(3) Remove two screws (1), disengage two locks of the upper cover (2) using a flat-head screwdriver, and 
remove the upper cover (2).

(4) Remove two pan-head screws (3) and remove the cover frame (4).

(5) Disengage the plate and the frame. (Refer to 3.3.6.)

(6) Remove two screws (5) and remove the separator assy (6).

(7) Lift the paper stay (7) and disengage it from the separator bracket (8), then remove the separator 9. 
The spring (10) comes off at the same time, so be careful not to lose it.

Содержание OKIPAGE 20





























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды