OKIDATA OKIPAGE 20, Руководство по обслуживанию

Страница: 197 / 284

Page: 109
Service Manual - OKIPAGE20
Chapter C Duplex Unit
(1) Remove the Frame-Main (DUP) (See section 3.3.2).
(2) Unscrew two screws (1) to remove PLATE-Earth (F/R) (2).
(3) Unscrew three screws (3) to remove PLATE-Earth (F/R-2) (4).
(4) Disengage the latch to remove the Bearing L (5) , GEAR-Z40S8 (6) , Bearing (7) and ROLLER-Feed
(RV) 8). (At this time, Knock Pin (9) can be removed simultaneously.)
(5) Unscrew the screw (10) to remove the PLATE-Earth (BTM) (11).
(6) Disengage the latch and remove two PULLEY-MX25 (12) , Mini-Pitch Belt (13) and two Bushes (14).
(7) Disengage the latch to remove the Bearing Feed (15) and ROLLER Feed (F) (16).
(8) Remove the E-Ring (17) and Bush (18).
(9) Unscrew two screws (19) to remove the GEAR Assy (20).
(At this time, the GEAR-Z40S6 (21) , Knock Pin (22) and ROLLER-Feed (R) (23) can be removed.)
(10) Unscrew two screws (24) to remove Motor (25).