manualshive.com logo in svg

OKIDATA ML320 Turbo, Руководство по обслуживанию

Поделиться
Скачать
OKIDATA ML320 Turbo Скачать руководство пользователя страница 49

    
When a dot is printed, current passes through the coil, creating a magnetic field which counters 
the magnetic field of the permanent magnet. The armature and pin spring forward. A dot is printed 
on the paper.

When current is removed from the coil, the magnetic field of the permanent magnet attracts the 
armature. The pin is retracted into the printhead.

The printhead contains a built-in thermistor (rated at 110 degrees Celsius). The thermistor 
monitors the printhead temperature. If the temperature exceeds the 110 degrees Celsius, 
the thermistor causes a signal to be generated on the main controller board. The printer 
stops printing. A BUSY signal is sent to the host computer. Data remains in the print buffer 
as long as power is supplied to the printer. When the printhead temperature drops below 
the 110 degree Celsius threshold, the BUSY signal to the host computer becomes inactive. 
Printing is resumed.

   

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business 
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Содержание ML320 Turbo







































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды