OKIDATA ML320 Turbo, Руководство по обслуживанию

Страница: 176 / 294

Blinking O
N External RAM Error Replace the control
board
Blinking O
N Spacing<R>Error Go to RAP 02 ( )
Blinking ON Serial Interface
Error Replace the Serial
Interface Board
Fault Alarm Conditions - Rev D
MEN
U
Lamp
Statu
s ALARM
Lamp
Status SELEC
TLamp
Status 10 12 17 20 PR
OP UT
L Error
Conditio
n Action
Curre
nt<R>
Mode ON Curre
nt
CPI " " " " " " " " " " Paper
Out Add paper
Blinki
ng ON Curre
nt
CPI " " " " " " " " " " Printhead
Temp Normal
Blinking ON Internal
RAM
Error Replace the
control
board
Blinking ON Program
ROM
Error Replace the
ROM.<R>R
eplace the
control
board
Blinking ON External
RAM
Error Replace the
control
board
Blinking ON Spacing
Error Go to
RAP 02 (
)
Blinking ON Serial
Interface
Error Replace the
Serial
Interface
Board
Blinking ON EEPROM
error Replace the
EEPROM
CAUTION: Check the contacts between the power interconnect module, the control board,
and the power supply board (Rev A and B units ONLY). Clean the contacts with if dirty.
If contacts are bent or broken, replace the module. Proper inspection and cleaning of the
power interconnect module contacts can eliminate a false diagnosis of a failed control