OKIDATA ML320 Turbo Скачать руководство пользователя страница 218

Страница: 218 / 294

Verify that the ribbon and paper are installed.

Power ON the printer.

Press MODE. The SEL light will go out and the MENU lamp will light.

When the MENU lamp is lit, the functions printed BELOW the operator panel switches
are activated.

Press GROUP. The first line of the menu will print.

FONT

Print Mode

Utility

(GROUP)

(ITEM)

(Current SETting)

Press GROUP until you reach the desired group.

Press ITEM until you access the desired item of a group.

Press SET until you access the desired setting for an item.

Press MODE to record the changes and return to Print Mode. The MENU lamp will go out and
the SEL lamp will light.

4.10.05 Resetting to Factory Defaults

CAUTION: Always print the menu before resetting to factory defaults. All customized information

will be lost once the menu has been reset.

Menu

Power OFF the printer.

Press and hold the MODE and SELECT switches while powering ON the printer.

Menu and Top of Form

Power OFF the printer.

Press and hold the PARK and TOF/QUIET switches while powering ON the printer.

Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)

Содержание ML320 Turbo















































































































































































































































































Результаты поиска

Содержание ML320 Turbo

Отзывы:

Бренды по названию

Популярные бренды

OKIDATA ML320 Turbo, Руководство по обслуживанию

Результаты поиска

Содержание ML320 Turbo

Отзывы:

Бренды по названию

Популярные бренды