OKIDATA Microline ML395, Руководство пользователя

Страница: 69 / 79

IBM Commands
IBM Commands
This section contains the commands for the IBM XL24 Proprinter and XL24 AGM emulations, grouped by
function.
Note: Normally the commands in this table will override the Menu settings. Except as noted, these
commands are canceled and the printer returns to the factory and Menu settings when the printer
receives an Initialization, Software I-Prime, or Change Emulation command, or when it is turned off and
then on again.
IBM Function Command Notes
Horizontal Control
Carriage Return ASCII: CR
Dec: 13
Hex: 0D Prints data in buffer and performs carriage return.
Set Horizontal Tabs ASCII: ESC D n
1
n
2
... n
k
NUL
Dec: 27 68 n
1
n
2
... n
k
0
Hex: 1B 44 n
1
n
2
... n
k
00
Sets horizontal tab stop positions
n = 1 to 255: specifies position of tab stopmaximum is number of
characters per
line
k = 1 to 28; n1 = 0: clear tabs
Default: every 8 columns
Horizontal Tab ASCII: HT
Dec: 9
Hex: 09 Moves to next horizontal tab stop
Reset Tabs to Default ASCII: ESC R
Dec: 27 82
Hex: 1B 52 Resets horizontal tabs for default: every 8th character. Also resets
vertical tabs to default of 1 line.
Set Left & Right
Margins ASCII: ESC X n m
Dec: 27 88 n m
Hex: 1B 58 n m Sets left (n) and right (m) margins in character columns at current
pitch. Once set, margins remain fixed even if character pitch is
changed.
n = 0 to 255; n = 0: left margin unchanged
m = 0 to 255; m = 0: right margin unchanged
m must be at least 1 character space (at 10 cpi) to the right of n.
Start/Stop
Unidirectional Printing ASCII: ESC U n
Dec: 27 85 n
Hex: 1B 55 n n = 1: Unidirectional printing On
n = 0: Unidirectional printing Off (return to bidirectional)
Backspace ASCII: BS
Dec: 8
Hex: 08 Prints data in buffer and moves one character to the left according
to current character pitch.
ML395 ( 96-02-07 )