12
OKIPAGE 14ex, 14i and 14i/n
USB Port driver
Note:
Installation of USB driver is only required for
Windows 98.
General
A USB interface has the following restrictions:
•
Will not operate using a MS-DOS or Windows
95/3.1/NT 4.0/NT 3.51 operating system.
•
Will not operate using a Windows 98 operating
system that has been upgraded from a Windows
95/3.1 operating system.
•
Do not disconnect the USB interface cable during
printing.
•
Do not immediately disconnect and connect the
USB cable or vice versa. Wait at least 5 seconds
before re-connecting or disconnecting the cable.
•
The operation of a printer is not assured if a USB
compatible device is connected concurrently with
other USB-compatible machines.
•
When connecting multiple printers of the same
type, they appear in the print folder as *****,
***** (copy2), ***** (copy3), etc. These
numbers depend on the order of connecting or
turning on each printer.
•
If a USB hub is used, it is necessary to connect
the USB hub directly to the computer.
Installation
1.
After the [Add New Hardware Wizard] window
appears, click on [Next].
2.
Select [Search for the best driver for my device
(Recommended)] and click on [Next].
3.
Insert the printer software CD-ROM disk into the
CD-ROM drive.
4.
Make sure CD-ROM drive is checked and click
on [Next].
5.
After Windows finds the USB driver, click on
[Next].
6.
After files have finished copying, click on
[Finish].
7.
If the [Add New Hardware Wizard] window
appears again, click on [Cancel] and restart the
computer.
Содержание OKIPAGE14i
Страница 1: ...OKIPAGE 14ex 14i and 14i n Setup Guide ...
Страница 4: ...iv OKIPAGE 14ex 14i and 14i n ...
