Oki OKIPAGE 24DX, Руководство по обслуживанию

Страница: 4 / 424

Table of Contents Page
............(2)-3 Paper feed jam 63
............(2)-4 Paper exit jam 63
............(2)-5 Duplex INPUT JAM 63
............(2)-6 Duplex FEED JAM1 63
............(2)-7 Duplex FEED JAM2 63
............(2)-8 Duplex FEED JAM3 63
........(3) Paper size error 64
........(4) Fuser unit error (ERROR 71), (ERROR 72), (ERROR
73) 65
........(5) I/F time-out between printer and optional tray (ERROR
81) 66
........(6) I/F time-out between printer and Duplex Unit (ERROR
83) 67
........(7) I/F time-out occurs between the printer and the
operator panel (ERROR 80) 68
........(8) Message cannot be received through the parallel
interface 69
........(9) Message cannot be received through the serial
interface 69
........(10) Data cannot be received through the OKI HSP
interface 69
........(11) Synchronous serial I/O error (ERROR 74) 69
....6.5.3 Image Troubleshooting 61
........(1) An image is light or blurred entirely 62
........(2) Dark background density 63
........(3) Black paper is output 64
........(4) Black belts or stripes in the vertical direction 65
........(5) Cyclic error 66
........(6) Print voids 67
........(7) Poor fusing 68
........(8) White belts or streaks in the vertical direction 69
........(9) Snowy print of high density pattern 69
........(10) Blotchy faded print 69
........Contents - Figure 6-5 70
........Contents - Figure 6-6 71
7 Wiring Diagram
7.1 Interconnect Signal Diagram 72
7.2 PCB Layout 73
....7.2.1 Main Control Board (HBY PCB) 74
....7.2.2 Power Supply Board (120V/230V) 75
....7.2.3 Power supply board (High voltage)
....7.2.4 LEX-PCB
....7.2.5 Flash ROM module (BOARD-FSL or BOARD-FSL-2)
7.3 Resistance Check
7.4 Program Font/ROM Location
8 Parts List
Figure 8-1 Printer Unit 76
Figure 8-2 Frame - Main Unit 77
Figure 8-3 Base Unit 77
Figure 8-4 Duplex Unit 77
A Centronics Parallel Interface