Oki OKIPAGE 24DX, Руководство по обслуживанию

Страница: 3 / 424

Table of Contents Page
........3.3.17 Roller Assy - Feed 43
........3.3.18 LED Head
........3.3.19 Paper cassette, ROLLER Assy - Feed, ROLLER
Assy - Hopping
........3.3.20 Frame Assy - Separation
........3.3.21 Transfer Roller / TR Gear / TR Bearing
........3.3.22 EP lock shaft
........3.3.23 LEVER Assy - Out Sensor
........3.3.24 Toner sensor lever
........3.3.25 Paper sensor lever
........3.3.26 Inlet sensor lever
........3.3.27 Power supply unit
........3.3.28 Lever-Paper end & Lever-Paper near end
........3.3.29 Guide Assy - Cassette (L)
........3.3.30 Guide Assy - Cassette (R)
........3.3.31 Removing/Installing Duplex Unit
........3.3.32 Board-LEX
........3.3.33 Connector (IMSA-9714N-14A)
........3.3.34 Photo Sensor
........3.3.35 SOLENOID Assy
........3.3.36 Motor
4 Adjustment
4.0 Adjustment 44
....4.1 Maintenance Modes and Functions 45
........4.1.1 User maintenance mode 46
........4.1.2 System maintenance mode 47
........4.1.3 Engine maintenance mode 47
........4.1.4 EEPROM initialization 47
....4.2 Adjustment When Replacing a Part 48
........4.2.1 Setting LED Head Drive Time 49
........4.2.2 Destination setting 50
........4.2.3 Setting of LED head drive time 50
5 Periodic Maintenance
5.1 Periodic Maintenance 51
5.2 Cleaning 52
....5.2.1 Cleaning the LED Lens Array 53
....5.2.2 Cleaning the Plastic Film 53
6 Troubleshooting Procedures
6.1 Troubleshooting Tips 54
6.2 Check Points Before Correcting Image Problems 55
6.3 Notes When Correcting Image Problems 56
6.4 Preparation Before Troubleshooting 57
6.5 Troubleshooting Flowchart 58
....6.5.1 Status Monitor Message List 59
....6.5.2 LCD message troubleshooting 61
........(1) The printer does not work normally after being turned
on. 62
........(2) Paper jams 63
............(2)-1 Paper input jam (1st tray) 63
............(2)-2 Paper input jam (front feeder) 63