Oki OkiLAN 6120i Скачать руководство пользователя страница 62

Страница: 62 / 219

III - 13

Section 3 - Chapter 2 - OkiNet for NetWare

OKI OkiLAN 6120i User’s Guide

NetW

are

Bi-directional Printer Status Support

Enable this option for enhanced status from
bi-directional printers that support PJL.

Output Type

Select the desired level of support for 1284
communications. The following settings are available:

- Compatibility (no bidi)
- 1284 (Std Nibble Mode) (default)
- 1284 (ECP or Fast Nibble Mode)

SNMP Configuration Options

SNMP options specify which information is necessary
for an SNMP manager to access the OkiLAN 6120i.
The system variables are for user convenience and are
optional.

SNMP community names are used as passwords to
GET and SET information on the OkiLAN 6120i. The
values should be changed for enhanced security.

To configure SNMP specific information, select the
SNMP file tab. The following screen will display:

Note: SNMP options need to be configured only if

you are managing OkiLAN 6120i products or
getting system information using SNMP.

Содержание OkiLAN 6120i




























































































































































































































Результаты поиска

Содержание OkiLAN 6120i

Отзывы:

Oki OkiLAN 6120i, Руководство пользователя, Страница: 62 / 219

Результаты поиска

Содержание OkiLAN 6120i

Отзывы: