manualshive.com logo in svg

Oki OkiLAN 6120i, Руководство пользователя, Страница: 213 / 219

Поделиться
Скачать
Oki OkiLAN 6120i Скачать руководство пользователя страница 213

VIII - 2

Section 8 - Regulatory Information

OKI OkiLAN 6120e User’s Guide

Federal Communications
Commission Radio Frequency
Interference Statement

This equipment generates and uses radio frequency
energy. If not installed and used according to the
manufacturer’s instructions, this equipment may
cause interference with radio/TV reception.

The Federal Communications Commission has
established technical standards regarding radio
frequency energy emitted by computing devices.

This equipment complies with Part 15 of the FCC
Rules, subject to the following conditions: This
device may not cause harmful interference; and it
must accept any interference received, including
interference that may cause undesired operation.

There is no guaranteed that interference will not
occur in a particular installation. If you suspect that
this equipment is interfering with radio/TV reception
try the following:

• While observing the interference, turn the suspect

equipment off and back on. If the inteference
stops when you turn the equipment off , and
starts again when you turn the equipment on, the
equipment is probably the source of your
problem.

• Connect the equipment and the receiver to

different electrical outlets.

• Increase the distance between the equipment and

the receiver.

• Reorient or relocate the receiving antenna.
• Consult your dealer or an experienced radio/TV

technician for additional advice.

OKI is not responsible for radio/TV interference
caused by using unauthorized cables or by making
unauthorized changes to this equipment.

Содержание OkiLAN 6120i




























































































































































































































Отзывы:

Нет отзывов