background image

|

T.37 Option Guide:  English

39

DHCP Server

If you are working with a DHCP (Dynamic Host
Configuration Protocol) server, the following items are set
automatically.

1: IP ADDRESS

2: SUBNETMASK

3: DEFAULT GATEWAY

8: DNS  P .SRV ADDRESS

Domain Name Service Primary Server

9: DNS  S .SRV ADDRESS

Domain Name Service Secondary Server

!

The default DHCP setting is Enable.

!

When you enter an IP Address from the front panel of
your fax unit, the IP Address is used as a static IP
address.  The DHCP setting is automatically disabled.
To enable the DHCP setting, use the Web Page,
OkiView 32, or Telnet functions.

After changing the network settings under User
Function 98, press MENU.

The machine goes into standby mode.

After a few seconds’ pause, the display shows that the
Network Card is being initialized.  The data on the
Network Card is updated when this message disappears.

Do not press MENU again while the initialization
message is on display (after changing the settings);
if you do, the settings will not update correctly.

Содержание OKIFAX 5780



















































































































Отзывы: