Oki OKIFAX 5780 Скачать руководство пользователя страница 89

Страница: 89 / 114

T.37 Option Guide: English

Operating Systems

NetWare

Recommended procedure:

Install the printer driver.

Install the network card utility.

Configure the network card.

The NetWare server has two modes.

printer server mode and

remote printer mode

The Network Card supports either mode.

To use NetWare, the fax machine should be attached as a
printer under NetWare control.

For more details, see the information on the supplied
CD-ROM.

Windows NT 4.0 and Windows 2000

Recommended procedure:

Install the printer driver.

Install the network card utility.

Configure the network card.

When printing directly from Windows NT 4.0 or 2000, use
LPR (Microsoft TCP/IP Printing), included in Windows NT
4.0 and 2000.

Add the LPR port as the driver output port and assign it the
IP Address configured for Network Card.

TCP/IP should be added to Windows NT 4.0, 2000 because it
is used for LPR.

While installing the driver on Windows 2000, you may
encounter a warning message about authentication.

Ignore this message if it appears.

It will not cause any problems with the installation of
the driver.

For more details, see the information on the supplied
CD-ROM.

Содержание OKIFAX 5780



















































































































Результаты поиска

Содержание OKIFAX 5780

Отзывы:

Похожие инструкции для OKIFAX 5780

Бренды по названию

Популярные бренды

Oki OKIFAX 5780, Инструкция по настройкам

Результаты поиска

Содержание OKIFAX 5780

Отзывы:

Похожие инструкции для OKIFAX 5780

Бренды по названию

Популярные бренды