Oki OJ2010, Руководство пользователя, Страница: 47 / 64

Print the Nozzle Test
Print the Nozzle Test
The Nozzle Test pinpoints and cleans (purges) any clogged nozzles in the print cartridges.
After the test is complete, a test line prints so you can see if the cleaning process was
successful.
Use this test
- if you suspect the nozzles are clogged
- or -
- if characters are not printing completely.
To run the Nozzle Test:
1) Load paper in the sheet feeder.
2) Open the OKIJET 2010 printer control dialog box.
3) Click the Cartridges tab.
4) Click Clean Print Nozzles.
The printer feeds a sheet of paper and prints the nozzle test pattern.
5) Examine the test pattern.
This example shows a test pattern of all nozzles functioning correctly on the black print
cartridge.
A comparable example for the color cartridge (actual pattern will be in color):
6) Compare the diagonal line at the top and bottom of the test pattern.
- Look for a break in the diagonal line. A break in the line shows clogged nozzles.
- If the bottom line shows improvement, run the test again.
- If the improvement continues, run the test a third time.
- If all nozzles are not printing after running the test three times, continue with the next
step.
7) If the print quality still has not improved, remove and reinstall the print cartridge
OJ2010 ( 96-02-07 )