42114101 Rev.1
52 /
(2)
When using the continouos paper
1)
Set the change lever either to the rear side or the bottom side position. (See Figure
2-13.)
2)
Set a sheet of paper either to the push tractor.
3)
Press the “FF/LOAD” switch.
4)
The LF motor starts its operation to feed the paper up to the print start position.
5)
The paper is fed in up to the TOF position (Factory default: 0.85 inches from the top).
Push down the “FF/LOAD” switch.
;
;;
;
;
Detection of the sheet supplied
PE
LF action
Line feed (about 3 inches) until the
detection of the sheet supplied
When the “”FF/LOAD” switch is pushed down, the LF motor feeds in the sheet about 3
inches. When the LF motor completes the operation and the sheet has not been fed in,
the feeding operating operation becomes, ineffective, thus resulting in the feeding jam.
Содержание ML490 Series
