manualshive.com logo in svg

Oki ML421 Series, Руководство по обслуживанию, Страница: 35 / 133

Поделиться
Скачать
Oki ML421 Series Скачать руководство пользователя страница 35

 42113901          Rev.2 

35 /

Oki  Data  CONFIDENTIAL

2.2.3 Head Gap Adjusting (See Figure 2-5.)

The head gap adjusting lever moves back and forth to tilt the carriage frame, altering the gap
between the printhead and the platen.

The adjusting screw, which is connected to the adjusting gear rotates when the adjusting lever
is moved creating a fine gap adjustment. If the adjusting gear is pushed down, the adjusting
screw can be turned with a screw driver to change the coarse gap adjustment.

When the adjusting lever is set to range 

2

 ~ 

5

 the contact which is attached to the under side

of the carriage cover will connect with the contact of the space motor PC board. The printer
will reduce the printing speed automatically to ensure that adequate printing pressure is main-
tained for multipart paper.

And, the adjusting cam adjusts the headgap toward left and right side in accordance with the
guide rail up and down as a position of the left end of it.

Содержание ML421 Series






































































































































Отзывы:

Нет отзывов