background image

44473001TH  Rev.1 

189 /

Oki  Data  CONFIDENTIAL

7. TROUBLESHOOTING PROCEDURES

No.

Category

PJL Status 

Code

Error Warning

Description

32

Warning

10760

K)

5

Please install new K Toner 

Cartridge. 

 

 

Please see Help for details.

Indicates that a waste 

toner box represented by 

%COLOR% has become 

full and needs to be 

replaced.  

  (occur in K only.) 

%COLOR% 

 K

33

Warning

-

5

%COLOR% Toner Empty 

 

 

 

Please see Help for details.

Indicates that a toner is 

empty and that there is no 

data (idle state). 

The same message as 

that for STATUS_ID_ 

TONER_EMPTY_W is 

displayed. 

LED indication:

  When K is empty, both 

Color and Mono Start 

key LEDs go out.

  When any toner except 

K is empty, Mono Start 

key LED is on (Color 

Start key LED go out).

No.

Category

PJL Status 

Code

Error Warning

Description

33

Warning

%COLOR% 

 Y 

 M 

 C 

 K 

 

=== 

This will occur only 

during a job that 

requires printing.  

During other jobs, 

Toner Empty is handled 

as STATUS_ID_IDLE

_TONER_EMPTY_W 

(warning). 

If a print job is 

requested during  

STATUS_ID_IDLE_ 

TONER_EMPTY_W,  

the status changes from  

STATUS_ID_IDLE_ 

TONER_EMPTY_W  

to STATUS_ID_ 

TONER_EMPTY  

and an error message 

appears. 

 

When a monochrome 

print job is requested 

while a color toner is in  

STATUS_ID_IDLE_ 

TONER_EMPTY_W,  

if the CU can identify it 

as a monochrome job, 

we will change it so that  

STATUS_ID_IDLE_ 

TONER_EMPTY_W  

of color toner won't be 

detected.

Содержание MC561





















































































































































































































































































Отзывы: