MC360 MFP User’s Guide
Troubleshooting > 120
>
To remove a sheet from the central area of the belt,
carefully separate the sheet from the belt surface and
withdraw the sheet.
paper jam belt.jpg
>
To remove a sheet just entering the fuser, separate the
trailing edge of the sheet from the belt, push the fuser
pressure release lever (1) towards the front and down
to release the fuser’s grip on the sheet, and withdraw
the sheet through the drum cavity area. Then allow the
pressure release lever to rise again.
NOTE
If the sheet is well advanced into the fuser (only a short
length is still visible), do not attempt to pull it back. Follow
step 12 to remove it from the rear of the printer.