Oki MC-860 / CX2633MFP Скачать руководство пользователя страница 56

Страница: 56 / 391

43967002TH Rev.1

56 /

Oki Data CONFIDENTIAL

3. Installation

3.2.2 Main unit and list of accessories

• Confirm that main unit is free from damage and stain when observing out-

side of the main unit.

• Confirm that all of the accessories are supplied with the main unit and the

accessories are not damaged.

• If any accessory is missing or if any abnormality is found, contact Oki con-

tact point.

Warning

Failure to observe the following precautions

may result in physical damage.

The MC860dn is heavy weighing approx.68 kg. Three or more

persons should work together to raise the MFP.

MC860 main unit

Note!

The image drum cartridges have alredy been installed inside the

main unit earlier.

Software CD-ROM (2 pieces)

Memo

The add-on tray unit [1 stacking tray (with long cabinet)] and [2

stacking tray (with short cabinet)] can be installed in the MC860dn
as the options.

Image drum cartridge

(Each one piece of cyan, magenta, yellow, black)

Starter toner cartridge

(Each one piece of cyan, magenta, yellow, black)

MC860dtn

MC860dn

User fs Manual CD-ROM

Содержание MC-860 / CX2633MFP








































































































































































































































































































































































































Результаты поиска

Содержание MC-860 / CX2633MFP

Отзывы:

Похожие инструкции для MC-860 / CX2633MFP

Бренды по названию

Популярные бренды

Oki MC-860 / CX2633MFP, Руководство по обслуживанию

Результаты поиска

Содержание MC-860 / CX2633MFP

Отзывы:

Похожие инструкции для MC-860 / CX2633MFP

Бренды по названию

Популярные бренды