manualshive.com logo in svg

Oki MC-860 / CX2633MFP, Руководство по обслуживанию

Бесплатно загрузите руководство по техническому обслуживанию для Oki MC-860 / CX2633MFP с нашего сайта manualshive.com. Получите доступ к детальной информации о техническом обслуживании этого продукта, чтобы улучшить его производительность и продлить срок службы.

Поделиться
Скачать
background image

Oki  Data  CONFIDENTIAL

43967002TH  Rev. 1 

344 /

7.  Troubleshooting

Note!

  Toner sensor operation check method using the SWITCH SCAN function of 

the self-diagnostic mode. 

(1)  How to check operation of the toner sensor at the printer side.

1.  Status change of the toner sensor can be checked from the Operator 

Panel  using  the  self-diagnostic  mode.  First,  switch  the  display  to  the 
Operator Panel display. For the method of switching the display to the 
Operator Panel display, refer to item 5.3.2.3 Switch Scan Test.

2.  Remove the ID unit and the toner cartridge (TC) from a printer. There 

is a window inside a printer opposing the ID side when viewed from 
the front of a printer. The toner sensor is located inside the window. 

3.  Place a white paper 3 mm away from the sensor window. The white 

paper should be placed in the manner of opposing the toner sensor. 

4.  When light is reflected by a white paper so that incident light falls on 

the  toner  sensor,  the  Operator  Panel  display  shows “L”. When  the 
paper is moved so that any light is not reflected by the paper so that 
the incident light does not reach the toner sensor, “H” is displayed on 
the Operator Panel. 

5.  If the Operator Panel display toggles between “H” <-> “L” as a paper 

is flipped in front of the toner sensor, it indicates that the toner sensor 
and the related system of the printer are working normally. 

 

Action to be taken at NG 

•  Clean surface of the toner sensor to remove the stains due to residual 

toner and paper dust. 

•  Check the connection condition of the FFC cable at the PU main PCB 

(PU) and at the toner sensor PCB (PRZ).

•  Perform  the  operation  check  again.  If  the  situation  is  not  improved 

and remains unchanged, replace the PU main PCB (PU) or the toner 
sensor PCB (PRZ). 

(2)  How  to  check  operation  of  the  toner  sensor  at  the  toner  cartridge  (TC) 

side
1. To  the  position  where  the  toner  sensor  is  confirmed  to  be  operating 

normally  in  the  printer  itself  by  the  above  paragraph  (1),  install  the 
TC  and  the  ID  unit  to  check  operations  by  observing  display  on  the 
Operator Panel. 

2.  If  the  ID  unit  works  normally,  the  display  on  the  Operator  Panel  will 

toggle between “H” <-> “L” in synchronism with movement of the silver 
reflector plate that is located on the side of the ID. 

 

Action to be taken at NG 

•  Check  operation  condition  of  the  respective  ID  motors  by  using  the 

Motor & Clutch Test of the self-diagnostic mode. 

•  Clean surface of the silver reflector plate on the side of ID to remove 

stains. (Stain due to toner or paper dust).

•  Replace the TC of different color and the ID unit as a pair.
  If a satisfactory operation is attained by using a pair of TC of different 

color and the ID unit, replace the TC or replace the ID unit. 

(16-3)  Error caused by the defective mechanism

Check item

Check work

Action to be taken at NG

(16-3-1)  Mechanical load applied to the ID unit

ID unit

Check if a heavy mechanical load is being 
applied to the ID unit due to breakage of 
the waster toner belt, or not.

Replace the ID unit. 
If any attempt of 
using new ID unit 
as a trial is going to 
be made, be sure 
to use the System 
Maintenance Menu 
FUSE KEEP MODE.

(16-3-2)  Motor operating condition

ID motor

Confirm that the respective ID motors work 
normally or not by using the Motor & Clutch 
Test of the self-diagnostic mode. 
Check if any extra load exists or not.

Replace the PU 
PCB or ID motor

Содержание MC-860 / CX2633MFP








































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MC-860 / CX2633MFP

DataCard SP35 Plus Quick Install Manual preview
SP35 Plus
Бренд: DataCard Страницы: 8
DataCard Datacard SP35 Quick Install Manual preview
Datacard SP35
Бренд: DataCard Страницы: 8
DataCard SD Series Packaging Manual preview
SD Series
Бренд: DataCard Страницы: 3
Xerox C410 User Manual preview
C410
Бренд: Xerox Страницы: 262
Canon PIXMA TR4500 Series Getting Started preview
PIXMA TR4500 Series
Бренд: Canon Страницы: 100
Canon LBP1760P Service Manual preview
LBP1760P
Бренд: Canon Страницы: 394
Xerox 7400DT - Phaser Color LED Printer Evaluator Manual preview
7400DT - Phaser Color LED Printer
Бренд: Xerox Страницы: 20
Kyocera KM-1820 Quick Start Manual preview
KM-1820
Бренд: Kyocera Страницы: 2
Partex Moca Quick Start Manual preview
Moca
Бренд: Partex Страницы: 12
Lexmark 5470 - X Color Inkjet User Manual preview
5470 - X Color Inkjet
Бренд: Lexmark Страницы: 202
Samsung SL-M3375FD/SEE Quick Manual preview
SL-M3375FD/SEE
Бренд: Samsung Страницы: 2
Samsung SL-C460FW Quick Installation Manual preview
SL-C460FW
Бренд: Samsung Страницы: 2
Samsung SL-M2820DW (Korean) Driver Manual preview
SL-M2820DW
Бренд: Samsung Страницы: 16
Samsung Xpress M202 series Service Manual preview
Xpress M202 series
Бренд: Samsung Страницы: 109
Samsung SF-76x series Service Manual preview
SF-76x series
Бренд: Samsung Страницы: 103
Samsung Xpress C480 Series Service Manual preview
Xpress C480 Series
Бренд: Samsung Страницы: 146
Samsung SL-C1860FW Service Manual preview
SL-C1860FW
Бренд: Samsung Страницы: 136
Samsung SL-C2670FW Service Manual preview
SL-C2670FW
Бренд: Samsung Страницы: 147

Бренды по названию

Популярные бренды

Загрузить еще бренды