Oki IP-6620, Руководство по обслуживанию

Страница: 293 / 572

OKI Data Infotech Corporation CONFIDENTIAL
Chapter 5 Troubleshooting (Engine Section and USB Controller Section)
5-134
No Items to be Checked Action
3 Linear encoder condition Check that the linear encoder is clean and not damaged.
(1) Clean the linear encoder by wiping it softly with a soft cloth
moisten with ethanol. Take care not to damage the encoder
or remove any attach part.
(2) If the encoder is damaged, replace it.
4 The width of the V-shaped
folded part on the
PCB-ASSY-HCB1M-side FFC Check that the width of the V-shaped folded part on the FFC is
proper. If not, adjust it. For the adjustment procedure, see
6.8.4
PCB-ASSY-HCB1M .
5
FFC’s external damage
Check the following to ensure that the FFC is not damaged.
-
FFC’s terminal is detached from its base.
-
FFC’s edges have not been abraded by friction.
If the FFC is damaged, replace it.
6 FFC
’s connector connection
Reconnect the FFC on both the PCB-ASSY-HCB1M side and the
PCB-ASSY-IPB5-100 side.
If the cable terminals are smeared, softly wipe them with a soft
cloth or lint-free paper dampened with ethanol before connecting
them.
7
Robot cable’s connector
connection
Reconnect the robot cable on both the PCB-ASSY-HCB1M side
and PCB-ASSY-ACT3 side.
Before connecting, check that the connector terminals and cable
connection part are not disconnected. If a connection failure is
found, replace the robot cable.
8
SUS belt
Replace the SUS belt.
9
Timing belt
Replace the timing belt.
10
Y motor
Replace the Y motor.
11 CABLE ENCODER, MW (linear
encoder) Replace the linear encoder, CABLE ENCODER, MW
12 PCB-ASSY-HCB1M Replace the PCB-ASSY-HCB1M.
13 PCB-ASSY-ACT3 Replace the PCB-ASSY-ACT3.
14 PCB-ASSY-IPB5-100 Replace the PCB-ASSY-IPB5-100.
15 FFC Replace all four FFCs.
16 Robot cable Replace the robot cable.
17 Driving pulley Replace the driving pulley.
18 Driven pulley Replace the driven pulley.
■
System error 2a02
：
No Items to be Checked Action
1 Firmware Upgrade the firmware to the latest version.
2 PCB-ASSY-IPB5-100 Replace the PCB-ASSY-IPB5-100.