6
6-133 Imposition settings
ES3640e MFP EFI Job Management Guide - 133
Duplex
Use the Duplex menu to specify the relationship of content areas
on opposing sides of a sheet. Specify On for duplex (two-sided)
printing or Off for simplex (one-sided) printing.
When you choose On, the job is printed as duplex using a Top-Top
setting, meaning that the tops of pages on opposing sides of a
sheet are located on the same edge (usually the preferred choice
for imposed book layouts).
Layout settings
A layout is a plan that specifies the
number, ordering, and rotation of page
images on the sheet. DocBuilder Pro
supports layouts of up to 25 pages per
sheet, in a matrix of up to 5 rows by 5
columns (50 pages duplex). All
combinations of rows and columns allow gang printing; however,
only Gang Up layouts in the 5 x 5 matrix support imposition.
Note:
If the number of pages in your job does not divide evenly
into the number of rows and columns in the layout you select, you
may see some sheets with blank spaces. The layout you select
should correspond to the number of pages in your job.
Rows
Click the Rows up and down arrows to specify the number of rows
(up to five) in a layout, or specify the number of rows in the
layout by typing a value in the Rows field. Changes to the Rows
value are reflected immediately in the main window, whether you
are in Layout or Preview mode.
The Rows value interacts with the Columns and Scale settings.
When you choose a value that causes content to extend beyond
the edge of the sheet, DocBuilder Pro provides a visual warning.
See
Содержание ES3640eMFP
Страница 1: ......
