Oki ES3032a4, Руководство пользователя

Страница: 36 / 72

Menu functions > 36
C
ALIBRATION
P
RINT
S
TATISTICS
ITEM SETTINGS EXPLANATION
Auto Density On/Off Enables/disables automatic density adjustment.
Adjust Density Execute If Execute is selected, the printer will immediately
adjust density and reflect it in TRC compensation.
This adjustment must be executed when the
printer is idling. It can become invalid if executed
in any other state.
Adjust
Registration Execute When this menu is selected, the printer performs
AutoAdjust Registration.
This adjustment must be executed when the
printer is idling.
Print Tuning
Pattern Execute Prints the pattern for the user to adjust TRC.
Ordinarily, this function is not needed because TRC is
automatically adjusted to the recommended levels
through density adjustment and TRC compensation.
Adjustment results will be reflected as offset values
(addition) to the corrections through the Adjust
Density/TRC Compensation function.
Cyan/Magenta/
Yellow/Black
Tuning Highlight -3,-2,-1,
0 ,+1,+2,+3,
Adjusts HIGHLIGHT (light area) of the TRC.
+ = Darker
- = Lighter
Mid-Tone -3,-2,-1,
0 ,+1,+2,+3,
Adjusts MID-TONE area of the TRC.
+ = Darker
- = Lighter
Dark -3,-2,-1,
0 ,+1,+2,+3,
Adjusts DARK area of the TRC.
+ = Darker
- = Lighter
Cyan/Magenta/
Yellow/Black
Darkness -3,-2,-1,
0 ,+1,+2,+3,
Adjusts the engine density.
The Darkness settings for each of CMYK will be
reflected as offset values (addition) to the corrections
through the Adjust Density/TRC Compensation
function.
ITEM SETTINGS EXPLANATION
Enter Password XXXX Enters a password to enter Print Statistics menu.
The default value is “0000”.
The password for entry to Print Statistics is different
from the password for entry to Functions-Admin Setup.
“Print Statistics” category is not shown when Print
Statistics function is not supported.
Section
Counter Enable /Disable Specifies if the section counter is displayed in Usage
Report Print or not.
Enable: Displayed, Disable: Not displayed.
Enable must be selected in Functions/Print Statistics/
Usage Report.
Reset Group
Counter Execute Resets the main counter to zero.
When executing this menu, resets the main counter to
zero and exits from the menu.
Enable must be selected in Functions/Print Statistics/
Usage Report.