Oki ES3032a4, Руководство пользователя

Страница: 11 / 72

Paper recommendations > 11
M
ULTI PURPOSE TRAY
The multi purpose tray can handle the same sizes as the cassette trays but in weights up
to 220
g/m²
. For very heavy paper stock use the face up (rear) paper stacker. This ensures
that the paper path through the printer is almost straight.
The multi purpose tray can feed paper widths from 76mm to 215.9mm and lengths up from
127.0mm to 1220mm (banner printing).
For paper lengths exceeding 356mm (Legal 14in.) use paper stock between 90g/m² and
128g/m² and the face up (rear) paper stacker.
Use the multi purpose tray for printing on envelopes and transparencies. Up to 50 sheets
of transparencies or 10 envelopes can be loaded at one time, subject to a maximum
stacking depth of 10mm.
Paper or transparencies should be loaded print side up and top edge into the printer. Do
not use the duplex (two-sided printing) function.
F
ACE DOWN STACKER
The face down stacker on the top of the printer can hold up to 350 sheets of 80g/m²
standard paper, and can handle paper stocks up to 188g/m². Pages printed in reading order
(page 1 first) will be sorted in reading order (last page on top, facing down).
F
ACE UP STACKER
The face up stacker at the rear of the printer should be opened and the tray extension
pulled out when required for use. In this condition paper will exit via this path, regardless
of driver settings.
The face up stacker can hold up to 100 sheets of 80g/m² standard paper, and can handle
stocks up to 220g/m².
Always use this stacker and the multi purpose feeder for paper stocks heavier than
188g/m².
D
UPLEX UNIT
This option provides automatic two-sided printing on the same range of paper sizes as
tray 2 (i.e. all cassette sizes except A6), using paper stocks from 64 - 120g/m².
NOTE:
The duplex unit comes as standard with Sys_2 and Sys_3 models.