Oki COREFIDO B822dn, Руководство пользователя, Страница: 86 / 453

Basic operations
- 86 -
Long paper

For thick paper, the toner may stick thinly to the whole paper or the printing may be light.

If the paper grain direction does not match the paper feeding direction, paper jams may occur.

Do not use paper that has been printed once with a thermal transfer printer, inkjet printer, etc.

The paper wrapper shows the orientation of the surface. Load paper properly so that the face side is the
printing side.

The paper is wrapped in moisture-proof paper to prevent moisture. Please use the paper as early as
possible after opening its package.

If the paper has a GSM weight other than 128g/m 2 , the print quality may deteriorate. Always perform trial
printing and check that there are no problems.

Be sure to set the paper size to portrait length. The portrait length cannot be set to a value shorter than the
landscape length.

Some applications may not be available.

Even when using under the recommended conditions, the long paper with a length exceeding 432mm may
not be able to guarantee the print quality.
Irregular-sized paper (custom size)

Skewing, curling, warping, folded corners (the edge is folded) and paper jams caused by these factors
may occur. Check the print result of the paper to be used in advance.

Register the paper in portrait orientation and load it in portrait orientation in the tray.

Some applications may not be available.

The quality of printing on the paper with a length exceeding 432 mm will be not guaranteed.

If the paper is too long and protrudes from the paper supporter of the MP Tray, support the paper with your
hand.

For the paper size that can be fed from each tray and the paper size that can be printed on both sides,
refer to "
Applicable paper
(P.82)".

If you cannot print correctly on a large-sized paper, it is suggested to set [Quality] to [Normal] in the PS
printer driver.

Always perform trial printing and check that there are no problems.
Recycled

The toner may stick thinly to the whole paper or the printing may be light.

Some recycled paper contains additives that may reduce the printing quality. Be sure to check that it is the
recycled paper for the electrophotographic printer before using it.
Paper applicable to each tray
Tray1
Media type Media size Media weight
Applicable number of sheets
B822 B842
Plain
Postcard
Envelope
Label
Partially printed
paper
Colored paper A3, A4, A5, A6, B4, B5, B6, Tabloid, Letter,
Legal 13, Legal 14, Statement, Executive,
Envelope (Yougata #0), Envelope (Kakugata
#2), Postcard, Japanese Double Hagaki
PostCard, Custom size (Width: 90 ~ 297 mm;
Length: 148 ~ 432 mm) 60 ~ 220g/m
2
280 (When the
paper weight is
64g/m
2
)
580 (When the
paper weight is
64g/m
2
)