Oki COREFIDO B822dn, Руководство пользователя

Страница: 374 / 453

Troubleshooting
- 374 -
Message Error code Description
Caution: Non-Genuine consumable
detected
Check user's Manual "Trouble
Shooting" to restore machine
operation 709 You can use any consumables/maintenance parts, but the print
quality may be lowered and the optimum performance may not
be obtained.
If the use of non-genuine consumables/maintenance parts
causes damage to the product or results in your product not
functioning to its full specification, such damage or effects on
the product are not covered by warranty.
When you understand the above points and use non-genuine
consumables/maintenance parts, follow the procedure below.
Power off the main unit.
Power on this machine while pressing «CANCEL» on the
operator panel.
When "Ready to Print" appears, release «CANCEL».
The above operation will be recorded inside this machine.
Please contact our Customer Service Center if anything is
unclear.
Toner Sensor Error
Press Help for details 543 A toner sensor error has occurred.
Check that the blue lever (i.e. the toner cartridge lock lever) on
the left side of the toner cartridge is rotated all the way to the
back side.
If the error still persists, contact our Customer Service Center or
your dealer.
Check Paper
Paper Multi Feed
Tray Name
Press Help for details
401 Multiple sheets of paper are fed at a time from the displayed
tray. Or, the paper of a size different from the paper size setting
of the tray is fed.
Remove the jammed paper.
Remove the paper temporarily from the tray when multiple
sheets of paper are fed at a time. Shuffle the paper well,
horizontally align the edge of paper, and load the paper in the
tray again.
If there is no multi-feed error, check that the size of the paper
loaded in the tray matches the paper size setting of the
machine.
Check Paper
Paper Size Error
Tray Name
Press Help for details
400 Multiple sheets of paper are fed at a time from the displayed
tray. Or, the paper of a size different from the paper size setting
of the tray is fed.
Remove the jammed paper.
Remove the paper temporarily from the tray when multiple
sheets of paper are fed at a time. Shuffle the paper well,
horizontally align the edge of paper, and load the paper in the
tray again.
Otherwise, check that the size of the paper to print on matches
the paper size setting of the tray.
Install New Image Drum
Image Drum Life
To exceed the life,
press OK Button
Press Help for details 567 The image drum has reached the end of its service life.
Replace the image drum with a new one. You can continue
printing for a while by pressing «OK» on the operator panel, but
the print quality is not guaranteed.
To replace the image drum, refer to "
Replacing the image drum
and the toner cartridge (P.320)".
The fuser is not
installed properly
Press Help for details 348 The fuser is not properly installed. Please reinstall the fuser.
To install the fuser, see "
Replacing the maintenance kit (P.328)".
If the error persists, replace the fuser with a new one.