Oki COREFIDO B822dn, Руководство пользователя, Страница: 120 / 453

Changing settings from the operator panel
- 120 -
Item
Factory
default
setting
Description
Duplex On Sets whether or not to implement duplex
printing.
The value set in the printer driver takes
priority.
Binding Long Edge Specifies the binding method for duplex
printing.
The value set in the printer driver takes
priority.
Media Check Enable Sets whether to check the mismatch
between the paper size of the print data and
that of the tray.
Even if it is set to [Disable], paper jams may
occur when printing on both sides or printing
from an expansion tray.
A4/Letter Override Yes Sets the functions of auto switching of the
printing paper from A4 to Letter when A4
paper runs out and Letter paper is loaded, or
from Letter to A4 when Letter paper runs
out.
Edge to Edge Off Specified to expand the print margin.
The value set in the printer driver takes
priority.
Resolution 600 dpi Sets the resolution.
The value set in the printer driver takes
priority.
Toner Save Off Sets the toner save level.
Default Orientation Portrait Specifies the print orientation. For
PostScript, this setting is disabled.
Edit Size Cassette
Size Sets the size of the drawing area when the
size is not specified by the paper size edit
command from a PC.
X Dimension 210millimeter Sets the default paper width for custom
paper sizes.
Y Dimension 297millimeter Sets the default paper length for custom
paper sizes.
PS Setup
* For B842
only
L1 Tray Type1 Sets the tray selection number of level 1
operator command of PostScript.
Network Protocol RAW Specifies the PS communication protocol for
network connection.
USB Protocol RAW Specifies the PS communication protocol for
USB connection.
PDF Media Size Current Tray
Size Specifies the paper size for direct printing of
PDF files.
PDF Scaling Size 99% Set the reduction ratio when [Scaling Size] is
selected in [Size in PDF file].
PDF Print Mode Quality
priority Sets whether to prioritize print quality or print
speed when a PDF is printed.
PCL Setup Font Source Resident2 Selects the location of the font to be used.
Font Number C1 Selects the number of the font to be used.
Value range: I0 ~ I90 when [Resident] is
set/C1 - C4 when [Resident2] is set