Oki C9800hdn, Руководство по настройке, Страница: 23 / 168

1
1-11 Connecting network cable to the Fiery
Back view of the printer
Ethernet connection
For Ethernet connections, the Fiery supports cabling, defined as Category 5 for use
with 100BaseT; or as Category 3, Category 4, or Category 5 for use with 10BaseT.
The cable uses an 8-pin RJ-45 connector that plugs into the RJ-45 socket on the
C9800.
N
OTE
:
The 100BaseT type supported by the Fiery is 100BaseTX, also known as Fast
Ethernet. If an Ethernet hub is used, it must be a 100BaseTX hub. The term
“100BaseT” is used to refer to 100BaseTX.
T
O CONNECT TO THE
E
THERNET PORT
• Connect the network cable to the RJ-45 connector on the back of the printer.
You must use a Category 5 unshielded twisted pair cable network cable for 100BaseT.
Parallel cable connection
RJ-45 Ethernet (10/100Base T)
Remove protective cover before
connecting cable
Parallel Port
USB Port