Oki C9800hdn Скачать руководство пользователя страница 103

Страница: 103 / 168

5-3

General Setup options

Server Name.

—Specify a name for the Fiery. This is the name that appears in the

Chooser on an AppleTalk network.

OTE

Do not use the device name (C9800) as the server name. If you have more than

one Fiery, do not assign them the same name.

Date and Time.

—Specify the system date and time, which are recorded on the Job

Log.

Enable Printed Queue.

—Specify whether to enable the Printed queue, a storage

location on the Fiery hard disk for recently printed jobs. You can reprint jobs from the
Printed queue without resending them to the Fiery. If the Printed queue is not
enabled, jobs are deleted from the Fiery disk immediately after they are printed.

Jobs Saved in Printed Queue.

—Specify the number of jobs to be stored in the

Printed queue. Jobs in the Printed queue take up space on the Fiery hard disk.

Содержание C9800hdn









































































































































































Результаты поиска

Содержание C9800hdn

Отзывы:

Oki C9800hdn, Руководство по настройке, Страница: 103 / 168

Результаты поиска

Содержание C9800hdn

Отзывы: