Oki C9800hdn, Руководство по настройке, Страница: 108 / 168

5
5-8 Setting up the Fiery from a Windows Computer
Ignore EOF Character. —Available only if Enable Parallel Port is selected, this option
specifies that the Fiery should ignore end-of-file (EOF) messages. Select this option to
print PostScript files in binary format (not ASCII); under normal circumstances, this
option should not be selected. When this option is selected, the Fiery uses the parallel
port timeout value to determine when the end of the file has been reached.
Parallel Port Timeout (seconds). —Available only if Enable Parallel Port is
selected, this setting determines how long the Fiery waits without receiving data from
the parallel port before deciding that the current job is complete. Until the timeout,
the Fiery cannot receive new jobs through the parallel port, but it can continue to
receive network print jobs.
Protocols
You can change TCP/IP, AppleTalk and IPX/SPX protocol settings for the Fiery.
Change these settings on the Protocol1 and Protocol2 tabs.