- 140 -
Changing Network Settings From the Web Page
5
5.
Network Settings
3
Select [
Network Setup
]>
[
IEEE802.1X
].
4
Select [
Enable
] for [
IEEE802.1X
].
5
Select [
EAP-TLS
] for [
EAP Type
].
6
Enter a user name in [
EAP User
].
7
Select [
Do not use SSL/TLS
Certificate for EAP authentication
]
and then click [
Import
].
8
Enter the file name of the certificate.
Only a PKCS#12 file can be imported.
9
Enter the password of the certificate and
then click [
OK
].
10
Select [
Authenticate Server
] and then
click [
Import
].
11
Enter the file name of the CA certificate
and then click [
OK
].
Specify a certificate issued by the certificate
authority from which the RADIUS server obtained
a certificate. A PEM, DER, and PKCS#7 file can be
imported.
12
Click [
Submit
].
The network card reboots to enable the new
settings.
13
When the standby screen appears on the
printer, turn off the printer.
14
Go to
“Connecting Your Printer to an
Connecting Your Printer to an
Authentication Switch
1
Make sure that the printer is turned off.
2
Connect an Ethernet cable to the
network interface port.
3
Connect the Ethernet cable to the
authentication port of an authentication
switch.
4
Turn on the printer.
5
Set up the printer.
Reference
● For details on the initial setup, refer to the User's
Manual (Setup).
Changing EtherTalk Settings
(for Mac OS X only)
Note
● EtherTalk cannot be used with Mac OS X 10.6.
Changing EtherTalk Printer Name
1
Access the printer’s web page and log in
as the administrator.
2
Select [
Admin Setup
].
3
Select [
Network Setup
]>[
EtherTalk
].
4
Enter a new name in [
EtherTalk
Printer Name
].
5
Click [
Submit
].
Changing EtherTalk Zone
1
Access the printer’s web page and log in
as the administrator.
2
Select [
Admin Setup
].
3
Select [
Network Setup
]>[
EtherTalk
].
4
Enter a new zone name in [
EtherTalk
Zone Name
].
5
Click [
Submit
].
Note
● Be sure to specify a zone within the same segment.
Содержание C831n
Страница 1: ......
Страница 150: ...44902902EE Rev3...
