Oki C831n, Руководство пользователя, Страница: 136 / 150

- 136 -
Changing Network Settings From the Web Page
5
5.
Network Settings
Configuring Your Computer
Memo
● Be sure to configure the printer before configuring your
computer.
1
Click [ Start ] and select [ Control
Panel ]>[ Administrative Tools ].
2
Double-click [ Local Security Policy ].
3
On the [ Local Security Policy ] window,
click [ IP Security Policies on Local
Computer ].
4
From the [ Action ] menu, select [ Create
IP Security Policy ].
5
On the [ IP Security Policy Wizard ],
click [ Next ].
6
Enter a [ Name ] and a [ Description ]
and then click [ Next ].
7
Deselect the [ Activate the default
response rule (earlier versions of
Windows only) ] check box and then
click [ Next ].
8
Select [ Edit Properties ] and then click
[ Finish ].
9
On the IP security policy properties
window, select the [ General ] tab.
10
Click [ Settings ].
11
On the [ Key Exchange Settings ]
window, enter a value (minutes) for
[ Authenticate and generate a new
key after every ].
Note
● Specify the same value as [ Lifetime ] specified in the
configuration for "Phase1 Proposal" in “Configuring
Your Printer” P.135 . Although [ Lifetime ] is specified
in seconds, enter a value in minutes for this step.
12
Click [ Methods ].
13
On the [ Key Exchange Security
Methods ] window, click [ Add ].
14
Specify [ Integrity algorithm ],
[ Encryption algorithm ] and
[ Diffie-Hellman group ].
Note
● Select the same value that was specified
in [ IKE Encryption Algorithm ],
[ IKE Hush Algorithm ], and
[ Diffie-Hellman group ] at the time of configuration
for "Phase1 Proposal" in “Configuring Your Printer”
P.135 .
15
Click [ OK ].
16
On the [ Key Exchange Security
Methods ] window, click [ OK ].
17
On the [ Key Exchange Settings ]
window, click [ OK ].
18
On the IP security policy properties
window, select the [ Rules ] tab.
19
Click [ Add ].
20
On the [ Security Rule Wizard ], click
[ Next ].
21
On the [ Tunnel Endpoint ] screen,
select [ This rule does not specify a
tunnel ] and then click [ Next ].
22
On the [ Network Type ] screen, select
[ All Network Connections ] and then
click [ Next ].
23
On the [ IP Filter List ] screen, click
[ Add ].
24
On the [ IP Filter List ] window, click
[ Add ].
25
On the [ IP Filter Wizard ], click [ Next ].
26
On the [ IP Filter Description and
Mirrored Property ] screen, click
[ Next ].
27
On the [ IP Traffic Source ] screen, click
[ Next ].
28
On the [ IP Traffic Destination ] screen,
click [ Next ].
29
On the [ IP Protocol Type ] screen, click
[ Next ].
30
Click [ Finish ].
31
On the [ IP Filter List ] window, click
[ OK ].
32
On the [ Security Rule Wizard ], select
the new IP filter from the list and then
click [ Next ].