Oki C650/ES6450, Основное руководство по эксплуатации

Страница: 71 / 180

Basic operations
- 71 -
Media Type Paper size Paper weight Other conditions
Long paper
Custom
Width: 55 - 216
Length: 91 - 1321
Envelope Com-9 Media using 24 lb paper Media made of craft paper,
electrophotographic paper or dry PPC
paper.
Media with the flap folded tightly.
Duplex printing is not available.
Com-10
Monarch
DL
C5
Index Card 3 x 5 inches Duplex printing is not available.
Label A4 Total weight: 0.1 - 0.2
mm Labels for electrophotographic printers or
dry PPCs where the surface paper,
adhesive, and backing are not degraded
by heat.
Media with a structure that prevents the
front paper from peeling off from the
backing in the heat fixing process of the
printer.
Media with a structure that prevents the
front paper from peeling off the backing
when the paper is traveling.
Media with a combined weight of 0.1 to
0.2 mm of front paper and backing.
Media whose surface paper covers the
entire backing sheet with no adhesive
sticking out.
Media with no breaks or creases.
Duplex printing is not available.
Letter
Partially printed
paper Equivalent to plain paper 64 - 256 g/m 2 Media that meets the requirements for
plain paper.
Media whose ink used for partial printing
is heat resistant and can withstand
230°C.
Colored paper Equivalent to plain paper 64 - 256 g/m 2 Media whose pigment or ink used to color
the paper is heat resistant and can
withstand 230°C.
Media made of electrophotographic
paper with the same features as plain
paper.
Long paper Width: 210 mm
Length: 356 to 1320 mm 128 g/m 2 If the length of the paper exceeds 356
mm, the width must range from 210 mm
to 216 mm.

If the paper grain direction does not match the paper feeding direction, paper jams may occur.

Printing from the MP tray may cause wrinkles. In this case, feed paper from the paper cassette.

The paper wrapper shows the orientation of the surface. Load paper properly so that the face side is the printing side.

The paper is wrapped in moisture-proof paper to prevent moisture. Please use the paper as early as possible after
opening its package.

Wrap unused paper in the wrapping paper, and keep it away from moisture absorption as much as possible.

If it is used beyond the normal room temperature (temperature: 17°C to 25°C; humidity: 40% to 60%), the printing
quality may be degraded or problems may occur such as paper jams, wrinkles, curls, and warpage.

Depending on the installation environment of the machine, printing on paper that contains moisture may cause white
steam or water droplets to appear around the paper exit area of the machine. This is not abnormal because the heat
generated when the toner is fixed to the paper evaporates the moisture contained in the paper.