Oki B6500 Series, Руководство по обслуживанию

Страница: 47 / 616

1 – 27
Chapter 1 Troubleshooting
FIP1.12 Paper Size Error
Step Check Yes No
Possible causes:
150 FEEDER ASSY (PL5.1.1)
150 PAPER CASSETTE (PL2.1.50)
SENSOR REGI (PL5.1.30)
ACTUATOR B (PL5.1.17)
HVPS/MCU (PL12.1.19)
GUIDE TRAY LEFT (PL7.1.7)
550 FEEDER ASSY (PL7.1.10)
550 PAPER CASSETTE (PL4.1.50)
1
Checking the paper size setup
Does the paper size in use match the size setup by
GUIDE ASSY END or by the driver on the PC?
Go to step 2.
Replace the paper,
or change the
paper size setting.
2
Checking NVRAM data
Does NV01 Configuration 2 meet the specifications?
Go to step 3.
Modify the memory
data.
3
Checking Regi Sensor
Remove EP CARTRIDGE.
Keep the lever of INTERLOCK S/W pushed as opening
COVER OPEN (PL1.1.2).
Does the number of Sensor/Switch Check increase one
by one, when ACTUATOR B of SENSOR REGI is
pushed and released?
Check using Chapter 2 Diagnostic [Sensor/Switch
Check].
Go to step 4.
Go to FIP1.28
SENSOR REGI.
4
Checking the paper feeding tray
Is the paper supplied from Tray 1 or Tray 2, when Error
is occurred?
Go to step 5. Go to step 6.
5
Checking Paper Cassette (1)
Are GUIDE ASSY END, GEAR SECTOR, RACK SIZE,
LINK SW SIZE1/2/3 of Paper Cassette of Tray 1 or Tray
2 installed correctly?
Go to FIP2.17
GUIDE TRAY
LEFT.
Reinstall the parts
causing Error.
6
Checking the paper tray
Is the paper supplied from Tray 3 or Tray 4 when Error
is occurred?
Go to step 7.
Replace HVPS/
MCU. (RRP12.10)
7
Checking Paper Cassette (2)
Are GUIDE ASSY END, GEAR SECTOR, RACK SIZE,
LINK SW SIZE1/2/3 of Paper Cassette of Tray 3 or Tray
4 installed correctly?
Go to FIP4.10
OPT ASSY SIZE.
Reinstall the parts
causing Error.