Oki B6500 Series Скачать руководство пользователя страница 187

Страница: 187 / 616

3 - 3

Chapter 3 Removal and Replacement Procedures (RRPs)

1.4

Description of procedures

"RRP X,Y "AAAAA" at the top of procedures represent the part name AAAAA are to be removed

and replaced.

"(PL X.Y.Z)" following the parts name in procedures represent that the parts are those of the plate

(PL) "X.Y", item "Z" in Chapter 5, Parts List. Their forms, replacing position or other conditions can

be seen in Chapter 5, Parts List.

In the procedures, directions are represented as follows.

- Front: Front when you are facing the front of this laser printer.

- Rear: Inner direction when you are facing the front of this laser printer.

- Left: Left hand when you are facing the front of this laser printer.

- Right: Right hand when you are facing the front of this laser printer.

The screws in procedures are expressed with their replacing position, color, characteristics and

nominal length, etc.

“In case of _____ specifications" in the procedures indicate that service operation should be pro-

vided only to laser printer of specified specifications (service operation should not be provided for

laser printer of specifications not covered).

"RRP X.Y" in the midst or at the end of sentences in the procedures indicate that work procedures

related with the "RRP X.Y" are described.

"Figure X.Y" at the end of the sentences of procedures indicate that illustrations instructive for the

"RRP X.Y" are included.

"Z)" in the illustrations correspond to "Z)" of the service procedures.

The screws in the illustrations should be removed using a plus (+) screwdriver unless otherwise

specified.

A black arrow in the illustrations indicate movement in the arrow mark direction. Numbered black

arrows indicate movement in the order of the numbers.

White arrows (FRONT) in the illustrations indicate the front direction.

For the positions of the connectors (P/J), refer to Chapter 7, Electric wiring.

JG3205AA

LEFT

FRONT

RIGHT

REAR

Содержание B6500 Series









































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание B6500 Series

Отзывы:

Бренды по названию

Популярные бренды

Oki B6500 Series, Руководство по обслуживанию

Результаты поиска

Содержание B6500 Series

Отзывы:

Бренды по названию

Популярные бренды