Oki B6500 Series, Руководство по обслуживанию

Страница: 243 / 616

3 - 59
Chapter 3 Removal and Replacement Procedures (RRPs)
RRP4.2 ROLL ASSEMBLY NUDGER (PL 4.1), ROLL ASSEMBLY FEED (PL 4.1)
Removal
1) Open the COVER OPEN (PL 1.1).
2) Release the hook securing the ROLL ASSEMBLY NUDGER, and pull the ROLL ASSEMBLY
NUDGER out from the SHAFT NUDGER (PL 4.1) (Figure 1).
3) Release the hook securing the ROLL ASSEMBLY FEED, and pull the ROLL ASSEMBLY FEED
out from the SHAFT FEED (PL 4.1) (Figure 1).
When removing, do not touch the roller surface of the ROLL ASSEMBLY NUDGER and
ROLL ASSEMBLY FEED.
Figure 1. Roll Feed Assembly
Replacement
The ROLL ASSEMBLY FEED and ROLL ASSEMBLY NUDGER are the same parts,
although the names differ.
1) Install the ROLL ASSEMBLY FEED to the SHAFT FEED (PL 4.1), and secure the ROLL ASSEM-
BLY FEED with the hook.
Be sure to install the hook of the ROLL ASSEMBLY FEED into the groove of the SHAFT
FEED.
2) Install the ROLL ASSEMBLY NUDGER to the SHAFT NUDGER (PL 4.1), and secure the ROLL
ASSEMBLY NUDGER with the hook.
Be sure to install the hook of the ROLL ASSEMBLY NUDGER into the groove of the
SHAFT NUDGER.
3) Close the COVER OPEN (PL 1.1).