19
EN
PROGRAM
9
Up to 20 tracks can be programmed in a desired sequence.
In stop mode, press the PROG button.
00
and
01
are flashing. The first numeric cluster shows the
track of the CD, the second numeric cluster is the track no. of the playlist. The order of track no. is
fixed (1, 2, ... 20).
10
Select the desired track with the
/
buttons. Confirm selected track by pressing the PROG
button again. As example shown is the 9. track of the CD saved as first (01) track in playlist.
00
is flashing and playlist display shows
02
. Select additional tracks with the
/
buttons and
confirm with PROG. Repeat this procedure until you have saved all desired tracks in desired order.
Playback can be started anytime after any number of tracks was saved, by pushing Play button .
The playlist covers max. 20 tracks. After 20, the playlist display starts at 01 again.
11
Start program:
Press
.
MICROPHONE
12
Switching on: Rotate the OFF./-VOL+ control in a clockwise direction. The POWER indicator lights
up.
13
Switching on microphone(s): Push the switch up.
14
Adjusting microphone volume: Rotate the MIC VOL control to the desired volume.
15
Pull one or both of the microphones from their holders and start speaking/singing.
Notes:
• Do not hold the microphone too close to your mouth to achieve a clear sound.
• Pointing the microphone towards the appliance or towards each other will lead to sound
distortions.
16
Switching off microphone(s): Pull the switch down.
SING-ALONG FUNCTION
17
Switching on: Rotate the OFF./-VOL+ control in a clockwise direction. The POWER indicator lights
up.
18
Open CD compartment door: Press the OPEN Button. Insert a CD with label facing towards you.
Close the CD compartment door.
19
Start playback:
Press
.
20
Switching on microphone(s): Push the switch up.
21
Adjusting microphone volume: Rotate the MIC VOL control to the desired volume. Pull one or
both of the microphones from their holders and start speaking/singing to the music of the CD.
22
Stop playback:
Press
STOP
.
23
Switching off microphone(s): Pull the switch down.
CONNECTING HEADPHONES
24
Connect headphones with a 3.5 mm plug to the PHONE socket. The loudspeakers are muted
whilst the headphones are connected to the appliance.
IM_OPC210CD_161027_V09.indb 19
27/10/16 2:15 PM
