Ojmar Nexo NLX1, Инструкция по эксплуатации, Страница: 10 / 188

1_INTRODUCCIÓN
1.3 GENERAL WARNINGS
To ensure the correct operation of our product in your facilities you must follow the
following rules:
•
Product installation and use must be carried out in accordance with the
technical operating conditions described in the corresponding manual.
•
When not specifically indicated, the proper installation and use of the
application is the responsibility of the customer.
•
Inspect the packaging and material for damage immediately after reception
of the material. Also check that the delivery is complete (accessories,
documentation, etc.).
•
If the packaging has been damaged during transport or you suspect that it
could have been damaged or may be faulty, the material must not be
started up. In this case, please contact us.
•
Our products' installation and handling must be carried out by authorised
staff. The electrical connections in particular must be carried out only by
qualified specialists.
•
Any replacement or removal of the protection covers is strictly forbidden.
•
Do not attempt to repair materials after a fault or damage and try to
operate it again. In such an event, it is essential you contact us.
•
We take no responsibility for damage caused as the result of misuse.
•
Before leaving the devices in their pick-up installations, the batteries must
be removed and left separately for the proper management.
1.3.1 Regulatory information USA
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.