Ojmar Nexo NLX1, Инструкция по эксплуатации

Страница: 44 / 188

3_PUESTA EN MARCHA
3.2.1 Ojmar NFC Model Programmer
The Ojmar NFC programmer works using the installation's Management Software.
When working using the Management Software, you can:
•
Read information from the cards/wristbands
•
Record user cards/wristbands, cancellation and maintenance cards .
•
Initialize locks that have previously been configured from the Software.
•
Upgrade the Firmware of the locks.
•
NB.: Each time an operation is performed between the NFC programmer
and the lock, the programmer updates the time of the lock.
FRONT VIEW RIGHT SIDE VIEW FRONT VIEW
1. Touch screen.
2. Card/wristband reading area: Must be placed in this area so that they can be
read/recorded by the programmer.
3. Screen On/Off:
Turn on: Press the button briefly (you will hear a beep).
Turn off: Hold button down for 4 seconds.
4. Connection to PC: USB socket used to connect the programmer to the
computer and in this way, load the initialisation data in the programmer.
•
NB.: A USB cable is supplied with the reader.