Ojmar Nexo NLX1, Инструкция по эксплуатации

Страница: 169 / 188

7_API REFERENCE MANUAL
OJMAR 169
7.4 EXAMPLE OF HOW TO CONFIGURE LOCK FROM
FACTORY MODE
This example will explain how to start working with a lock once it is received from
Ojmar S.A, starting from the initialization & configuration, creating a user card and
allowing it to close/open the lock and receiving 2 events as a maintenance
operation.
7.4.1 Lock Complete Configuration
7.4.1.1 Creation of a initialization frame
An initialization frame will be created using the following web service. Following
data will be introduced:
POST http://localhost:8086/initialization/initData
JSON request:
{
"num_installation":"B1B2",
"num_subinstallation":"C2",
"ssid":"OnlineSystem",
"password":"A1A2A3A4",
"encrypt_type":2,
"server_ip":"192.168.1.97",
"initial_ip":"192.168.1.100",
"gateway_ip":"192.168.1.10",
"range":"1-50",
"mask":"255.255.255.0",
"first_num_lock":1,
"last_num_lock":50,
"group":1,
"target": "pp"
}
JSON response:
{
"result": "ok",
"data":
"00051111B1B2C2098D020A0401000001000032B1B2030A04010000010000
32111104090401000001000032C2050B0401000001000032FFFFFF145B040
10000010000324F6E6C696E6553797374656D000000000000000000000000
0000000000000000413141324133413400000000000000000000000000000
000000000000000000002C0A80161C0A80164C0A8010A0132FFFFFF000A03
010800FE02411D