© 2015 OJ Electronics A/S
40
Programming 4-event times and temperatures
W
at
erline
r
oom Contr
oller -
type W
lC
t
3
For each event, start time and required temperature must be set.
Example: You want the heating to start at 07:00 in the morning
and the temperature to be 25°C. Press the OK
(√)
button for 3
seconds and the start time will be displayed. Change this to
07:00 with the UP (
△
) or DOWN (
▽
) button. Press the OK
(√)
button to confirm.
The temperature will now be displayed. Change this to 25°C
with the UP (
△
) or DOWN (
▽
) button. Press the OK
(√)
button to
confirm. This procedure can now be repeated for the second,
third and fourth events.
These settings will be valid for days 1-5, as shown on the
display. To program days 6 and 7, repeat the above. Days 6 and
7 are usually Saturday and Sunday, and only have two events
(generally morning ON and evening OFF).
The temperature can be set within the range of +5 to +35°C. It
is also possible to switch heating OFF for an event by reducing
the setting to 5°C and then pressing the DOWN (
▽
) button once
more.
notE: When programming the “sleep” time (event 4), ensure
that it is before midnight (00:00).
Press the oK (√) button for 3 seconds to start programming
Days 1-5
: Time and temperature
: Time and temperature
: Time and temperature
: Time and temperature
Days 6-7
: Time and temperature
: Time and temperature
Содержание WLM3
Страница 55: ... 2015 OJ Electronics A S 55 ...
